VALIDATED USABLE SPACE:
NUMBER OF PROVIDED TRAYS:
4 (3 Standard + 1 HTS)
DIMENSIONS (W x D x H):
710 x 825 x 1'990 mm
Cat. No.: 66000 | 66005
Cat. No.: 66001 | 66006
Intuitive operation with the new touch screen
Maintain control over the entire incubation process - at a glance!
The clear dashboard shows the target and actual display, the status of the device as well as an overview of all events and alarm messages. Even if these were already 4 weeks ago.
Easy weekly programming
Define without additional software and directly at the device, temperature drop down for your days off months in advance. Simply determine the start time or the time span as well as the frequency of your temperature reduction in a real-time calendar.
Various events and alarm functions are individually adjustable. For example: Deviations from the interior temperature can be limited asymmetrically via tolerance band limits or fixed via the temperature selection monitor of class 3.1 and 3.2. Class 3.2 is already included in the standard equipment of all cooled units.
Sample safety even in case of power failure
To optimally protect your samples even in the event of a power failure, you can program your HettCube with different behavior scenarios. These are selectable between the two possibilities of violating the tolerance band or a time period.
HettCube incubators combine the advantages of natural and forced convection to provide a stable and uniform environment for cultures. The fan is housed outside of usable space, providing higher throughputs and limiting airflow inside the incubator. Temperature is primarily maintained by radiated heat to ensure even temperature distribution and to prevent hotspots. This yields optimum growth conditions and considerably reduces the potential of samples drying out. The well-conceived air-guiding system, combined with optimal insulation, saves you an interior door. This allows easy and quick access and reduces maintenance and
The slim design requires little space. This offers you up to 50% more usable space with the same footprint.
In addition, Hettich incubators with their gentle airflow guarantee stable and homogeneous temperatures in a considerably larger part of the interior and thus offer 30% more validated usable space.
From the door to the optimised Hettich Telescope System slide-in units to the remarkable low noise level of ≤ 44 dB(A), the HettCube is characterised by its ease of use. HettCubes make your work easier by providing quick and convenient access to your samples with just one hand.
Minimal operating costs
Our HettCubes heat or cool only when necessary. At an operating temperature of 37 °C, they consume no more than 0,05 kWh. Thus you save up to 450 CHF energy costs per year with a HettCube. Thanks to the low energy consumption, with a HettCube you also avoid emissions of up to 940 kg CO2 per year and protect the environment.
First - class isolation
The insulation of the HettCubes consists of water-driven foam which does not contain any fluorinated hydrocarbons. Their GWP value (Global Warming Potential) is a thousand times lower than that of conventional insulating foams.
Use your uncooled HettCube even where comparable incubators need cooling, because HettCubes keep the temperature stable even at a difference of only 1 K (°C) to the ambient temperature.
Hettich products comply with all applicable safety regulations, carry the TÜV seal and are compliant with IvD. Hettich manufactures according to the applicable quality and environmental management systems,
including ISO 9001, ISO 13485 and ISO 14001. Each HettCube is temperature validated before delivery by means of the 9 point measurement and recieves a HettCert factory certificate, included free of charge. All temperature data are determined according to DIN 12880:2007-5.
The Hettich Telescop System, which fits in all three incubator sizes, allows the internal space of the HettCube to be used optimally. Telescopic rails make it easy to work and permit use of the entire surface area. Even samples that are way in the back can be easily reached.
The trays, drawers, holders and rails are separate components. You just hang the rails in the grids of the holders and put in the tray or drawer of your choice.
Tray pulls out up to 70%.
Cat. No.: 60031 (Standard tray)
Differents sets are available.
These flexible racks simplify handling, save time and enable the use of 16 tubes for different slant angles with 5° or 20°. The slant angle of the tubes can be very easily changed without the need for tools.
To use for:
Made of stainless steel, autoclavable.
Frame L: 60027
Frame XL: 60028
The new Petri dish rack allows large numbers of cultures to be processed quickly and economically. The rack has been specially developed to make the handling of Petri dishes easier. Made of stainless steel, autoclavable.
Advantages for the user in:
90 Petri dishes per rack (Ø 90 mm)
2 racks per pair of rails = 180 dishes
360 Petri dishes
900 Petri dishes
1'800 Petri dishes
Cat. No.: 60040 (Rack for Petri dishes, also with HTS available)
Process large sample quantities conveniently and economically.
With an inclination angle of 5°, the slide-in units are ideally suited for the Loewenstein method. The drawers are made of high-quality stainless steel and are autoclavable.
Your advantages at a glance:
Optimum use of space:
81 tubes (diameter 15 - 20 mm, length 160 mm) per insert
|HettCube 200||HettCube 400||HettCube 600|
|6 Einschübe = 486||16 Einschübe = 1'296 Röhrchen||18 Einschübe = 1'782 Röhrchen|
Cat. no.: 60041 (also available with HTS)
No additional inner door!
The glass door enables users to check on their cultures without opening the door. The well-conceived air-guiding system makes this possible.
HettCube 200: 60013
HettCube 400: 60029
HettCube 600: 60030